Author: Walters, D.R.
Paper Title Page
TUYBB3 Final Design of the APS-Upgrade Storage Ring Vacuum System 315
WEPLM10   use link to see paper's listing under its alternate paper code  
  • J.A. Carter, B. Billett, B. Brajuskovic, M.A. Lale, A. McElderry, O.K. Mulvany, J.R. Noonan, M.M. O’Neill, R.R. Swanson, K.J. Wakefield, D.R. Walters, G.E. Wiemerslage, J. Zientek
    ANL, Lemont, Illinois, USA
  Funding: Argonne National Laboratory’s work was supported by the U.S. Department of Energy, Office of Science under contract DE-AC02-06CH11357.
The Advanced Photon Source Upgrade project is progressing from its final design phase into production for the future 6 GeV, 200 mA upgrade of the existing APS. The storage ring arc vacuum system will include over 2500 custom vacuum chambers ranging from 70 mm to 2.5 meters in length and typically feature a narrow 22 mm inner diameter aperture. The scope of NEG coatings was increased to 40% of the length along the e-beam path to ensure efficient conditioning and low pressure requirements can be met. The final design phase required advancing previous work to a procurement-ready level and to address local and system level challenges. Local challenges include designing thin-walled vacuum chambers with carefully controlled lengths and outer profiles and also mitigating significant radiation heat loads absorbed along vacuum chamber walls. System level challenges include planning for the complex machine assembly, networking components to utilities, managing the quality of upcoming procurements. This presentation will highlight the major design challenges and solutions for the storage ring vacuum system and also plans for production and installation.
slides icon Slides TUYBB3 [10.852 MB]  
poster icon Poster TUYBB3 [5.028 MB]  
DOI • reference for this paper ※  
About • paper received ※ 27 August 2019       paper accepted ※ 30 August 2019       issue date ※ 08 October 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)